High-performance transmission fluid for automatic transmissions ROLF ATF MULTIVEHICLE is made on the basis of synthetic base oils and a multifunctional additives package of the latest generation, which provides the specified friction coefficient for high torque transmission, significantly reduces wear and prevents tearing. It has excellent anti-wear and antiscoring properties, which provides protection for the life of the oil. Provides optimum friction coefficient, due to which smoothness of gear shift is achieved. Due to the use of synthetic base components, the fluid has a high viscosity index, which results in excellent low-temperature properties.
ROLF ATF MULTIVEHICLE is designed for use in automatic transmissions of most modern Japanese, European and American cars, where these specifications are recommended.
It can be used in power steering systems where the use of fluids of this specification is required.
Допускается применение в гидроусилителях рулевого управления там, где требуется применение жидкостей, указанных спецификации.
• Excellent friction stability for smooth shifting without vibration and jerks.
• Excellent low-temperature fluidity, which is required for gear changes in cold climates.
• Correspondence to the specifications of the leading manufacturers of transmissions.
• Excellent antioxidant properties ensure high functionality of the oil for a lifetime.
Approvals and compliances
JASO M315 1A/M315 1A-LV13;
MITSUBISHI SP II, III;
NISSAN MATIC C, D, J;
HONDA ATF Z1 (except in CVT);
TOYOTA TII, III, IV, WS;
DEXRON IIIG (FORD AND GM VEHICLES OF MODEL YEARS 2003 AND EARLIER)
ATF IIIH FORD (FORD AND GM VEHICLES OF MODEL YEARS 2006 AND EARLIER)
Allison C-4 (TES-228);
TYPE A SUFFIX A (TASA);
ZF TE-ML 09, 11A & 11B;
|Name of characteristic||Method||Actual figure|
|Density at 15 °C, g/cm3||ASTM D4052||0,845|
|Kinematic viscosity at 100 °C, mm2/s||ASTM D445||7,87|
|Kinematic viscosity at 40 °C, mm2/s||ASTM D445||40,1|
|Viscosity Index||ASTM D2270||172|
|Brookfield dynamic viscosity at Minus 40 °C, mPa*s||ASTM D2983||14200|
|Flash point in an open crucible, ° С, not less||ASTM D92||218|
|Pour point, ° С, not higher||ASTM D97||-45|