ROLF KRAFTON S9 M 10W-40 is fully synthetic engine oil with high performance characteristics. Synthetic base oils provide excellent thermal and antioxidative stability, high viscosity index, low pour point and excellent low temperature fluidity and pumpability. An advanced additives package ensures unsurpassed extreme pressure and antiwear properties combined with excellent detergent-dispersed properties.
ROLF KRAFTON S9 M 10W-40 is designed for heavy duty turbocharged diesel engines operating in demanding conditions that meet EURO III, IV, V standards and are not equipped with diesel particulate filters (DPF).
Recommendations of manufacturers may differ, when applying, follow the instructions for your equipment.
• Synthetic base oils provide excellent anti-wear properties and low oil consumption for waste
• Excellent detergent-dispersant properties of the oil ensure engine cleanliness over the entire oil change interval
• Provides extended oil change intervals with unsurpassed engine protection throughout the life of the oil
• Meets the requirements of the global vehicle manufacturers, such as MAN, Mercedes-Benz, Scania, DAF.
Approvals and compliances
MB Approval — 228.5;
MTU category 3;
Renault VI RLD-2;
MAN M 3277;
Cummins CES 20072
|Name of characteristic||Method||Actual figure|
|Density at 15 °C, g/cm3||ASTM D4052||0,867|
|Kinematic viscosity at 100 °C, mm2/s||ASTM D445||14,23|
|Kinematic viscosity at 40 °C, mm2/s||ASTM D445||87,64|
|Viscosity Index||ASTM D2270||168|
|Dynamic viscosity CCS at minus 25 ° С, mPa * s||ASTM D5293||6180|
|Total Base Number (TBN) , mg КОН/g||ASTM D2896||16,2|
|NOACK volatility, %||ASTM D5800||9,8|
|Flash point in an open crucible, ° С, not less||ASTM D92||230|
|Pour Point, °C||ASTM D97||-36|