Menu Close

Rosneft Revolux D4 10W-40


Rosneft Revolux D4 10W-40 is a modern premium engine oil based on synthetic technologies. Designed for use in high-power diesel engines of freight trucks, highway vehicles, intercity buses and other vehicles with extended oil drain intervals, requiring oils that meet the requirements of modern API CI-4, ACEA E4, E7 and Euro-V and below environmental standards. The oil is approved by the world’s leading manufacturers.


Rosneft Revolux D4 10W-40 oil is designed for all-season use in modern diesel engines of freight trucks, highway vehicles, intercity buses and other vehicles that meet Euro-V and below standards, including those equipped with exhaust gas recirculation (EGR) systems and/or a selective catalytic reduction (SCR) system. The availability of official approvals allows the oil to be used for servicing during the warranty period.

Approvals and specifications

International specifications: API CI-4; ACEA E4, E7
Approvals: MAN M3277/M3377, MB-Approval 228.5; Volvo VDS-3; Renault RLD-2; MACK EO-N; Cummins CES 20078/77; Autodiesel, PJSC (YaMZ); Tutaev Motor Plant, PJSC AAI STO 003 D5
Requirement compliance: Deutz DQC IV-10; MTU Category 3; Caterpillar ECF-1a; MB 228.3/228.1; MTU Category 1; Volvo VDS-2/VDS; Cummins CES 20076/72/71.


• Approved by the world’s leading manufacturers for extended oil drain intervals, which can significantly reduce service costs;
• Due to its high thermal oxidation stability, Rosneft Revolux D4 10W-40 oil allows to minimize the cylinder face polishing process and reduce the amount of scoring and varnish deposits;
• Efficiently neutralizes corrosive compounds formed during fuel combustion, and thus protects the engine components from corrosion;
• Functional additive package forms a protective film which prevents deposit formation, and dispersant additives keep soot particles apart, keeping the engine clean.


20 L, 216.5 L

Typical physical and chemical properties

Name of characteristic Test method Rosneft Revolux D4 10W-40
Kinematic viscosity at 100°С, mm2/s2/s GOST 33 / ASTM D445 13,5
Cold Cranking Viscosity (CCS) at - 25°С, mPa·s ASTM D 5293 4360
Viscosity Index GOST 25371 / ASTM D2270 162
Total Base Number (TBN) , mg КОН/g GOST 11362 / ASTM D4739 11,6
Sulphated ash, % mass. GOST 12417 1,49
Flash point, COC °C GOST 4333 / ASTM D92 215
Pour Point, °C GOST 20287 / ASTM D97 -35
NOACK evaporation loss, % GOST 32330 / ASTM D5800 12,0
Density at 15°C, kg/m33 GOST 3900 / ASTM D4052 865