Menu Close
 

SINTEC PLATINUM SAE 0W-20 API SP, ILSAC GF-6

Description

Fully synthetic motor oil "SINTEC PLATINUM SAE 0W-20 API SP, ILSAC GF-6" is made from high quality synthetic base oils and the latest multifunctional additive package from the world leader - Afton Chemical. Provides improved protection against premature ignition of the fuel mixture in the cylinder (LSPI), which has a damaging effect on gasoline engines. Meets increased requirements for fuel economy, protection of the timing chain from wear and resistance to the formation of carbon deposits on pistons, even for demanding engines of Japanese and Korean cars, regardless of the type, whether it is naturally aspirated or supercharged internal combustion engines.

Key features

  • Ideal for start-stop driving due to the formation of a strong lubricating film
  • Защищает от LSPI, отвечает повышенным требованиям к экономии топлива
  • Meets the latest engine requirements for Japanese and Korean cars
  • Resists the formation of deposits and sludge, keeping the engine clean throughout its life
  • Provides quick and easy engine start at low ambient temperatures

Application

Designed for use in the most advanced gasoline engines, especially those equipped with turbocharging and direct fuel injection, where fuel efficiency, LSPI protection and the highest level of ILSAC GF-6 performance are required, including the requirements of API SP and API SP Resource Concerving standards.

  • Recommended where API SP (or earlier specifications) and appropriate SAE 0W-20 viscosity grade are required
  • recommended for use in Japanese and Korean cars

Approvals and specifications

  • API SP
  • ILSAC GF-6

Packaging

  •  1 L
  •  4 L

Physicochemical properties

TYPICAL CHARACTERISTICS TEST METHODS SINTEC PLATINUM SAE 5W-30 API SP, ACEA C2/C3
Density at 20 °C, g/cm3 ASTM D4052 0,862
Viscosity Index ASTM D2270 175
Kinematic viscosity at 100 °C, mm2/s ASTM D445 7,93
Dynamic viscosity CCS at -35 ° С, mPa * s ASTM D5293 4690
Total Base Number (TBN) , mg КОН/g ASTM D2896 7,1
NOACK volatility, % ASTM D5800 10,3
Flash point in an open crucible, ° С, not less ASTM D92 236
Pour point, ° С, not higher ASTM D97 Minus 45