Menu Close
 

SINTEC PLATINUM SAE 5W-30 API SP, ACEA C2/C3

Description

Synthetic motor oil "SINTEC PLATINUM SAE 5W-30 API SP, ACEA C2 / C3" is made from high quality synthetic base oils and an advanced multifunctional additive package from the world leader - Afton Chemical. Provides protection against low speed pre-ignition (LSPI), a phenomenon that occurs in turbocharged direct injection engines. Compatible with exhaust gas aftertreatment systems. Meets modern fuel efficiency requirements. Provides excellent engine protection against wear, extended service intervals without deposits, and quick and easy engine starting at low temperatures.

Key features

  • Ideal for start-stop driving due to the formation of a strong lubricating film
  • Protects against LSPI
  • Low ash, compatible with exhaust gas aftertreatment systems
  • Resists the formation of deposits and sludge, keeping the engine clean throughout its life
  • Provides quick and easy engine start at low ambient temperatures

Application

Designed for use in the most advanced gasoline and diesel engines, especially those equipped with turbocharging and direct fuel injection, where fuel efficiency, LSPI protection and the highest level of API SP performance are required. Suitable for light truck diesel engines. The oil, resistant to mechanical destruction, is compatible with exhaust gas neutralization systems of internal combustion engines equipped with particulate filters and three-component catalysts, increasing the service life of the latter.

  • Recommended where lubricants are required of ACEA C3 / C2 or API SP (or earlier specifications) and appropriate SAE 5W-30 viscosity grade
  • recommended for use in Mercedes-Benz vehicles where an oil of the operating level MB 229.31 is required

Approvals and specifications

  • API SP
  • ACEA C2/C3
  • MB-Approval 229.31

Packaging

  •  1 L
  •  4 L

Physicochemical properties

TYPICAL CHARACTERISTICS TEST METHODS SINTEC PLATINUM SAE 5W-30 API SP, ACEA C2/C3
Density at 20 °C, g/cm3 ASTM D4052 0,864
Viscosity Index ASTM D2270 161
Kinematic viscosity at 100 °C, mm2/s ASTM D445 11,85
Dynamic viscosity CCS at -30 ° С, mPa * s ASTM D5293 4690
Total Base Number (TBN) , mg КОН/g ASTM D2896 7,3
NOACK volatility, % ASTM D5800 9,1
Flash point in an open crucible, ° С, not less ASTM D92 236
Pour point, ° С, not higher ASTM D97 Minus 40