Description
Premium synthetic engine oil with a low content of sulphate ash, phosphorus and sulfur is designed for use in modern heavy-duty diesel engines of the world's leading automakers, equipped with particulate filters. The unique composition of the oil can significantly increase the service interval and encourages fuel economy. The components are selected in a way as to ensure compliance with the requirements of the world's leading car manufacturers. The balanced formulation is based on the use of synthetic base oils and a special high-tech additives package. The oil has unsurpassed anti-wear properties, increased resistance to oxidation, prevents the accumulation of high-temperature deposits on the pistons and other elements of the cylinder-piston group, resists oxidation and sludge formation, maintains the stability of the properties for the maximum replacement intervals regulated by the engine manufacturer. This oil can be used in all engines that meet the requirements of Euro-4 and Euro-5, and some of Euro-6, and especially for those where the manufacturer recommends oils with low sulphate ash, phosphorus and sulfur oil (LOW-SAPS).
Approvals and compliances
Volvo VDS-3;
Mack EO-N;
Renault VI RLD-2;
MB-Approval 228.51;
DEUTZ DQC IV-18LA;
MAN M3271/M3477;
LIAZ
ACEA E6/E7-12;
MTU Oil Cat 3.1;
Renault RLD-2;
Suitable for use in Scania, Iveco, DAF
Packaging
20/208 L
Physicochemical characteristics
| Name of characteristic | Method | Actual figure |
| Viscosity grade | SAE | 10W-40 |
| Density at 15 °C, g/cm3 | ASTM D4052 | 0,867 |
| Kinematic viscosity at 100 °C, mm2/s | ASTM D445 | 15,3 |
| Kinematic viscosity at 40 °C, mm2/s | ASTM D445 | 102,5 |
| Viscosity Index | ASTM D2270 | 153 |
| Dynamic viscosity CCS at minus 25 ° С, mPa * s | ASTM D5293 | 6240 |
| Total Base Number (TBN) , mg КОН/g | ASTM D2896 | 9,9 |
| NOACK volatility, % | ASTM D5800 | 7,5 |
| Flash point in an open crucible, ° С, not less | ASTM D92 | 240 |
| Pour Point, °C | ASTM D97 | -38 |
